Services
Part L Compliance
Areas of Part L Compliance Calculations
ADL1 Volume 1 New Dwelling SAP Calculations
ADL1 Volume 1 Existing Dwellings Compliance
ADL1 Volume 2 New Buildings other than Dwellings SBEM Calculations
ADL1 Volume 2 Existing Buildings other than Dwellings Compliance
ADL1 Volume 1
EXISTING DWELLING COMPLIANCE
Approved Document L1 Volume 1 Conservation of Fuel
Document L1 Volume 1 is a complex document giving guidance for dwellings that are:
- Extended
- Refurbished
- Renovated
- Undergo a Material Change of use to a dwelling
- Have a change of Energy Status as a result of new or extended heating, ventilation or air conditioning systems.
HIBEC understand the complexities of ADL1 Volume 1 and the difference between the three posssible routes to compliance:
Route 1
The use of the ADL1 Volume 1 tables
The use of the tables given in the ADL1 Volume 1 for:
- the area of glazing permitted,
- the minimum U values of new and refurbished thermal elements (i.e. walls, floors and rooves)
- the minimum U values of controlled fittings (i.e. windows, doors and roof lights),
- the minimum standards of controlled services in compliance with the tables.
Route 2
The use of the Area Weighted Average U Values
A more flexible method of compliance for when an existing thermal element cannot be upgraded.
The reduction in energy efficiency performance from the un-upgradable element can be compensated for by upgrading beyond the minimum table value another thermal element.
Route 3
Whole Dwelling Calculation Method using SAP Calculation
This method allows for maximum flexibility where un-upgradable elements, poor controlled services or glazing areas in excess of the minimum allowed are required.
HIBEC can analyse your specification and advise on the simplest and most cost effective route to compliance undertaking the calculations and writing the report for submission to the Building Control Officer as required.