01564 795 566 enquiries@hibec.co.uk
Services

Part L Compliance

 

 

ADL1 Volume 1 DWELLINGS (2021 Edition)

Approved Document Part L1 Volume 1 Dwellings Conservation of Fuel and Power is the compliance guide for all new homes in the UK.

ADL1V1 requires the use of a national calculation methodology Standard Assessment Procedure (SAP) calculation to determine if:

  • The Dwellings Emission Rate (DER) achieves a Target Emission Rate (TER).
  • The Dwellings Fabric Energy Efficiency (DFEE) achieves a Target Fabric Energy Efficiency (TFEE).
  • The Dwellings Primary Energy Rating (DPER) achieves the Target Primary Energy Rating
  • All Thermal Elements (i.e. external walls, floor and rooves) meet minimum standards
  • All Controlled Fittings (i.e. windows, doors roof lights) meet minimum standards
  • All Controlled Services (i.e. boilers, fans, air conditioning, water heaters and lighting etc) meet minimum standards as set out in the tables
  • The building meets the designed quality standards for air tightness and thermal bridging.

HIBEC still undertake ADL 2013 calculations previously known as:

  • ADL1A New Dwellings
  • ADL1B Existing Dwellings
  • ADL2A New Buildings other than Dwellings
  • ADL2B Existing Dwellings

Just give us call to discuss your requirements on 01564 795566 

HIBEC are experienced SAP assessors with 20 years experience of using Elmhurst Accredited SAP software.

We work with the design team from the earliest possible stage helping to develop a compliant, practical and cost effective specification that delivers a compliant ‘As Designed SAP’ required for Building Control approval prior to commencing the build.

We can undertake independent U value calculations on desired construction details enabling construction details to be optimised.

We are able to advise on suitable approved, accredited or independent thermal bridging details which are imperative in achieving the ADL ‘fabric first’ approach through meeting the Target Fabric Energy Efficiency.

We are also experienced building services engineers who can advise on the most suitable environmental solutions appropriate to the development, helping to minimise or even eliminate expensive renewables through an integrated approach to all elements within the SAP calculation.

We have our own air tightness testing equipment and perform many dwelling air tests. This experience enables us to confidently advise on air test targets to use in the design stage SAP.

When the actual air test is carried out the result is inputted into the ‘as built’ SAP calculation which is required for Building Control Sign off. We are also able to produce the Energy Performance Certificate at the same time.

Using HIBEC to undertake your SAP calculations, air test’s and EPC’s will save you time, energy and money.