Planning Energy Statements
If getting through building regulations Part L isn’t a challenge in itself, many Local Planning Authorities (LPA’s) often add additional energy or carbon reduction targets on larger developments as a planning condition.
These usually take the form of supplementary planning documents or guidance notes which vary between LPA’s. Some LPA’s require 10% CO2 reduction over the regaled level achieved in the SAP/SBEM, whist others can ask for up to 35% reduction. HIBEC are experiences SAP and SBEM assessors and qualified CIBSE Low Carbon Consultants. We advise on the most cost effective and practical way the development can meet the targets set by Building Control and Planning Officers. We are able to assist in undertaking the calculations and prepare reports and statements to show planning compliance.
This compliance may be required in a particular format or follow a particular structure, for example to demonstrate a LPA’s requirement for a site to be designed under the Be Lean, Be Clean, Be Mean doctrine.
This means design the building to be thermally efficient first so the energy demand for heating etc is as low as possible-Lean, select renewable technologies to provide the service-Green and select efficient plant to use minimum energy-Mean.
Greater London Authorities for example use the Mayor of London Energy Assessment Guidelines 2018 that follows this principal.
Other authorities such as Milton Keynes, Warwick, Solihull, Wychavon, Oxford and other use the Carbon Trust Low Carbon Planning Toolkit ‘enplanner’.
There may also be a requirement to investigate the use of District Heating Networks or Combined Heat and Power (CHP) systems.